The machine has two fixed independent cutting sections. Once the card design is complete and printed, a single A4 sheet is placed on the lower tray and fed through the first cutting section.
The blades remove a 3mm vertical gutter down the middle and removes the edges leaving two strips. Each strip measures 85mm x 297mm.

These strips are then turned through 90 degrees and a single strip is placed on the upper tray, aligned by guides and passed through the upper cutting section.

This operation trims the top and the bottom whilst removing a 3mm gutter from between each card.
The result is 10 perfectly cut cards of 85 x 55mm.

Stylish Looking Machine

Dimensions:
W x D x H mm 430 x 220 x 170
Weight: 8.2kg
Warranty: 12 months or 100,000 business cards whichever comes sooner